Ashish and Anil can do a piece of work in 12 days and 16 days respectively. Ashish completed 25% of the work. Find the time taken by Anil to complete the remaining work.
Let the total work be (LCM of 12 and 16) = 48 units Efficiency of Anil = 48/16 = 3 units/day Remaining work = 48 x 0.75 = 36 units Time taken by Anil to complete the remaining work = 36/3 = 12 days
With a bucket full of water, a tank can be filled with 16 buckets. When each bucket holds 12.5 liters of water, how many buckets of 10-liter capacity c...
Pipe ‘A’ takes 10 minutes to fill a tank. Pipe ‘B’ takes 20 minutes to empty the same tank. If pipe ‘B’ is opened 4 ...
A leak in the bottom of the tank can empty the full tank in 18 hours. An inlet pipe fills water at the rate of 12 liters a minutes. When the tank is ful...
Pipe ‘A’ can fill a tank in 40 hours whereas leak ‘A’ can empty it in 50 hours. If they both operate along with pipe ‘B’, then the given tan...
A bath can be filled by the cold water pipe in 20 hrs and by the hot water in 30 hrs. Mohit leaves the bathroom after turning on both pipes simultaneous...
Pipe ‘A’ can fill a tank in 25 hours while pipe ‘B’ can empty it in 30 hours. They were operated on alternate hours starting with pipe ‘A’. ...
There was the leakage in the Oil container. If 10 litre of oil is leaked out per day then it would have lasted for 25 days and if the leakage was 16 lit...
Pipe ‘A’ can fill a tank in 25 hours whereas leak ‘A’ can empty it in 30 hours. If they both operate along with pipe ‘B’, then the given tan...
Pipe ‘A’ can fill a tank in 50 hours whereas leak ‘A’ can empty it in 60 hours. If they both operate along with pipe ‘B’, then the given tan...
Two pipes P1 and P2 can fill a cistern in 12 minutes and 15 minutes respectively. These pipes are opened alternately for 1 minute each, beginning with p...
