Question
Drone bee is used in agriculture sector
includingSolution
1. Applications: a. Crop Mapping: NDVI imaging (5cm resolution) b. Pest Control: • 90% accuracy in locust swarm detection • Precision spraying (saves 30% pesticides) c. Soil/Irrigation: • Moisture mapping (10% water savings) • pH analysis via hyperspectral imaging 2. DGCA Regulations: a. Yellow category drones (<25kg payload) b. Operational radius: 2km 3. Case Study: a. Meghalaya's "Drone Didi" initiative trains women operators
Pipe P can fill half of the tank in 8 hrs 5 min and pipe Q can fill the same tank completely in 16 hrs 5 min. Another pipe R can empty the full tank in ...
- An inlet pipe fills a water tank in 50 minutes and an outlet pipe empties the tank in 75 minutes. How much time will both take to fill half the tank when o...
A, B and C are three pipes connected to a tank. A and B together fill the tank in 30 hours, B and C together fill the tank in 40 hours. A and C together...
Pipe ‘A’ can fill a tank in 15 hours whereas leak ‘A’ can empty it in 45 hours. If they both operate along with pipe ‘B’, then the given tan...
Tap P can fill a tank in 18 hours, while tap Q can do it in 9 hours. If taps P, Q, and R are opened at the same time, how long will it take to fill the ...
Pipes 'A' and 'B' have the capacity to fill a tank in 12 hours and 15 hours, respectively. Conversely, pipe 'C' can drain the same tank in 20 hours. Ini...
A tank is filled with three pipes A, B, and C. Pipe A takes 18 hr. to fill 60% of the tank and Pipe B takes 8 hr. to fill 40% of the tank. Pipe A and Pi...
Tap A can fill a tank in 10 hours. Tap B can fill 12.5% part of the same tank in 2 hours, whereas Tap C can alone empty a tank in ‘x’ hours. 3/7 par...
- Pipes ‘D’ and ‘E’ alone can fill a tank in 16 minutes and 24 minutes, respectively, while pipe ‘F’ can empty the same tank in 48 minutes. If al...
Tap A can fill a tank in 20 hours and tap B can emptied it is 25 hours. Tap A starts filling and they opened for 1 hour each alternatively in what time ...
