Question
Lye peeling is done at a temperature
of:Solution
Lye peeling uses hot NaOH (93°C) to dissolve peels of tomatoes/peaches. The alkali hydrolyzes pectin, followed by rinsing to remove residual lye.
A single tap takes 12 hours to fill the entire tank. Initially, only one tap is open, and it fills half of the tank. At that point, four additional iden...
Pipe A and Pipe B together can fill the tank in 10 hours. The capacity of the pipe A is 30% of the capacity of the pipe B. How much time will pipe B alo...
Pipe ‘X’ and pipe ‘Y’ together can fill an empty tank in 24 hours while pipe ‘Y’ and pipe ‘Z’ together take 15 hours to fill the same ta...
Pipe A and Pipe B together can fill the tank in 32 hours. The capacity of the pipe A is 25% of the capacity of the pipe B. How much time will pipe B alo...
Pipes 'G' and 'H' can fill a tank in 24 hours and 8 hours respectively, while pipe 'I' can empty it in 48 hours. All pipes are opened together when the ...
- Pipes ‘D’ and ‘E’ alone can fill a tank in 16 minutes and 24 minutes, respectively, while pipe ‘F’ can empty the same tank in 48 minutes. If al...
Pipe ‘A’ can fill a tank in 27 hours. Pipe ‘B’ can empty it in 54 hours. If both are opened simultaneously, in how many hours will 66.67% of the...
Pipe ‘A’ and pipe ‘B’, together can fill 20% of a tank in 5 hours while pipe ‘C’ takes 30 hours to empty it. Pipe ‘A’ and pipe ‘B’ w...
Pipe ‘A’ can fill 25% of a tank in 6 hours while pipe ‘B’ takes 40 hours to empty fully filled tank. Pipe ‘A’ is ope...
Pipe ‘A’ takes 15 minutes to fill a tank. Pipe ‘B’ takes 25 minutes to empty the same tank. If pipe ‘B’ is opened 11 minutes after pipe ‘A...
