Use ‘transplant’ instead of ‘transform’.
Two pipes P1 and P2 can fill a cistern in 12 minutes and 15 minutes respectively. These pipes are opened alternately for 1 minute each, beginning with p...
Pipe ‘A’ and pipe ‘B’, together can fill 20% of a tank in 8 hours while pipe ‘C’ takes 50 hours to empty it. ...
Tap ‘A’ and tap ‘B’ can fill a tank in 40 hours and 36 hours, respectively. If both taps are opened together, then find the time after which tap...
There are 6 inlet and (x-2) outlet pipes attached to a tank. Each inlet pipe takes 20 hours to fill the tank and each outlet pipe empties the fully fill...
Two pipes can alone independently fill a bucket in 10 and 12 minutes. Both are opened together for 3 minutes after which the second pipe is turned off. ...
Pipe 'A' and pipe 'B', alone can fill a tank in 20 minutes and 30 minutes, respectively. Both the pipes were opened together to fill the tank, but later...
Two inlet pipes M and N alone can fill a tank in 10 hours and 12 hours respectively and an outlet pipe P alone can empty the whole tank in 8 hours. Firs...
Pipe ‘A’ can fill a 300-litre tank in 30 hours. If pipe ‘A’ is 25% more efficient than pipe ‘C’ whereas pipe ‘B’ is 50% more efficient t...
A cistern has a leak that can empty it in 12 hours. A tap is turned on, which fills water at the rate of 15 liters per hour. Now, the cistern gets empti...
An inlet can fill an empty tank in 6 hours whereas an outlet pipe can empty it in 12 hours. If (N - 1) such outlet pipes having same efficiency and (N +...
