Question
The device which transfer the signal from low
resistance region to high resistance region is –Solution
A transistor transfers a signal from a low resistance to high resistance. It has two PN-junctions: one junction is forward biased and other junction is reverse biased having low resistance path and high resistance pathrespectively.Theweaksignalisintroduced in the lowresistance, circuit and output is taken from the high resistance circuit.
Tap A can fill a tank in 15 hours. Tap B can fill 12.5% part of the same tank in 2 hours, whereas Tap C can alone empty a tank in ‘x’ hours. 5/8 par...
- Pipe 'A' can fill a tank in 24 hours. Pipe 'B' is ____% as efficient as pipe 'A'. If both pipes are opened simultaneously, the tank will be completely full...
Pipe A can fill a cistern in 18 hours. Pipes A and B together can fill it in 12 hours, while Pipes B and C together can fill it in 9 hours. In how many ...
In what time would a Cistern be filled by three pipes whose diameter are 2cm, 2 2/3cm and 4cm running together, where the largest pipe alone fill it in ...
An inlet tap alone can fill a tank in 40 minutes. However, when both an inlet and an outlet tap are open together, the tank takes 66 (2/3) minutes (or 2...
Pipe ‘A’ can fill a tank in 30 hours while pipe ‘B’ can empty it in 40 hours. They were operated on alternate hours starting with pipe ‘A’. ...
Pipes 'G' and 'H' can fill a tank in 15 and 20 minutes respectively. A leak opens when the tank is half full, removing (2/7)th of the water supplied. Wh...
Pipe A can fill the tank in 20 hours. Pipes A and B together can fill it in 10 hours. Pipes B and C together can fill it in 5 hours. In how many hours c...
Pipe ‘A’ can fill a tank in 25 hours while pipe ‘B’ takes 30 hours to empty it. Pipe ‘A’ is opened alone when the tank was empty and after 1...
Two pipes A and B can fill a tank in 24 min., and 32 min, respectively. If both the pipes are opened simultaneously, after how much time B should be clo...
Relevant for Exams:
