Question
Which of the following type of plough is generally
used for the breaking the hard pans? ÂSolution
Chisel plough is used for breaking hard pans and for deep ploughing (60-70 cm) with less disturbance to the top layers.
Two trains, 'P' and 'Q', begin their journey from stations 'A' and 'B' at the same time, heading towards each other. The total distance between stations...
There are two trains A and B. A start from point X at 5 AM towards point Y. Another train B starts at 6 AM from point X. If they meet at 10 AM an...
Train ‘A’ can cross a pole in 4 seconds and a 150 metre long platform in 10 seconds. If the ratio of length of train ‘A’ and train ‘B’ is 2:...
A train has to cover a distance of 210 km in 14 hours. If it covers half journey in 4/7th time, then the speed of covering the remaining dist...
Train ‘A’ travelling with a speed of 72 km/h can cross a pole in 18 seconds. If the length of train ‘B’ is 60% less than that of train ‘A’ a...
A goods train leaves a station at a certain time and at a fixed speed. After 11 hours, an express train leaves the same station and moves in the same di...
A train with a length of (p + 60) meters takes 30 seconds to cross a platform that is (q + 60) meters long while traveling at a speed of 20 meters per s...
Train X, traveling at a speed of 72 km/hr, crosses another train Y, which is moving in the opposite direction at a speed of 108 km/hr, in 't' seconds. I...
- A truck moving at 30 km/h is overtaken by a train in 20 seconds. If the train is travelling at twice the speed of the truck, calculate its length.
A 160 m long train crosses another 320 m long train running in the opposite direction in 12 seconds. If the shorter train crosses a pole in 16 seconds, ...
Relevant for Exams:
