Question
The RPM of standard PTO, equipped in tractor, is
Solution
The standard power take-off (PTO) speeds for tractors are typically either 540 revolutions per minute (RPM) or 1000 RPM. These PTO speeds are used to operate various agricultural implements and machinery that are attached to the tractor. The choice between 540 RPM and 1000 RPM depends on the specific equipment being used and its compatibility with the tractor's PTO speed.
- Meera noticed the sound of fireworks from a distance of 2.1 kilometers, reaching her after 24 seconds. Find out the speed of the sound.
The diameter of a wheel W is 63 cm. It completes 1000 rotations in 1 minute. Find the speed of the vehicle.
Ram needs to cover a certain distance to reach his destination. When he drives at a constant speed of 24 km/h, he arrives 2 hours later than planned. Ho...
A bike moving at a speed of 240 km/h takes 5 hours to reach the fuel station. If the target must be reached within 80 minutes, at...
Karan and Varun started running in a straight line at 5 m/s and 7.5 m/s respectively. If Karan started 90 meters ahead of Varun, ...
A bicycle moves at 30 km/h and needs 9 hours to complete a journey. A van completes the same journey in 3 hours. If the bicycle's speed is increased by ...
A boy can swim a certain distance downstream in 5 hours and return in 7 hours. If the rate of stream is 4 kmph then what is the speed of boy in still wa...
A boy goes to school with a speed of 75 km/h and comes back with a speed of 45 km/h. find his average speed?
A, B, and C are working together on a project. A can complete the project alone in 15 days, B in 20 days, and C in 30 days. On the first day, A, B, and ...
A Scooty is currently traveling at a speed of (2a – 90) km/hr, and a Bus is moving at a speed of (b + 30) km/hr. If the Scooty's speed were equal to t...
