Question
Lean period के लिए लिए सही
पारिभाषिक शब्द हैSolution
एक लीन अवधि आमतौर पर उस समय को संदर्भित करती है जब कोई कंपनी या तो बूटस्ट्रैपिंग कर रही है या अभी तक कोई लाभ अर्जित करना शुरू नहीं किया है।
The efficiency of pipe R is 60% more than the efficiency of pipe S. Pipe Q alone can fill 30% of the empty tank in 6 hours. Pipe R alone can fill an emp...
Two taps would fill a cistern in 18 and 24 minutes respectively. Both tapsbeing opened find when the Ist tap must be turned off so that the cistern may ...
An inlet can fill a tank in 36 minutes, and an outlet can drain it in 54 minutes. Find the time required to fill half the tank when both pipes are open.
Pipe L can fill a pool in 30 hours and pipe M in 45 hours. If both the pipes are opened in an empty pool, how much time will they take to fill it?
Pipe A alone fill the tank in x hours and Pipe B alone fill the tank in (x – 10) hours. If the efficiency of pipe B is triple of pipe A and pipe A...
Pipes A, B, and C are connected to a tank. Pipe A can fill the empty tank in 48 minutes, and Pipe B can do the same in 80 minutes. On the other hand, Pi...
Pipes X, Y, and Z can fill a tank in 12 hours, 6 hours, and 8 hours respectively. If the efficiencies of pipes X and Y are each reduced by 50% of their ...
- A pipe can fill a tank in 36 minutes while another pipe can drain the full tank in 48 minutes. Calculate how much time both pipes working together will tak...
Pipe ‘A’ can fill a tank in 15 hours while pipe ‘B’ can empty it in 45 hours. They were operated on alternate hours starting with pipe ‘A’. ...
- An inlet pipe fills a water tank in 50 minutes and an outlet pipe empties the tank in 75 minutes. How much time will both take to fill half the tank when o...
